Mechanical Injector

How does a high pressure diesel fuel pump work?
The Diesel Fuel Pump #High-pressure components of common-rail system.

When the air is compressed, the pressure inside the cylinder briefly rises to 400 to 600 pounds per square inch (normal atmospheric pressure is less than 15 psi).

The injector of the Common Rail System contains the injection nozzle, an actuator in the case of piezo injectors or a solenoid valve in the case of solenoid injectors plus the hydraulic and electrical connections to trigger the nozzle module. An injector connected to the rail via a short high-pressure line is installed in each engine cylinder.
 
The electrical, hydraulic servo system in the injector receives control impulses from the EDC (Electronic Diesel Control) to open and close the nozzle module. It is triggered either by a solenoid-valve or a piezo actuator. Injectors with a piezo actuator can have a slimmer design and achieve reduced switching noise. Both technologies achieve similarly short switching times and permit pilot, main and secondary injections. In this way, fuel combustion can be designed to be efficient and clean at all operating points. Cat Injector Nozzle 387-9427 For Bosch Ve Injection Pump Parts. 

China-Lutong Parts Plant as China's leading diesel injection system specialists with over 25 years experience, hope to meet you in our booth and have a meeting. This largest international automotive aftermarket trade show in the Middle East, Automechanika Dubai acts as the central trading link for markets that are difficult to reach connecting the wider Middle East, Africa, Asia and key CIS countries.  Cat Injector Nozzle 387-9427 For Bosch Ve Injection Pump Parts. 

China-Lutong being in the business line for years,we always keep our steps with the international standard and technics

and absorb the advanced producing system.So our products are exported to wide client-base spread across the

world.

We serve our customers in a courteous and professional manner.In pursuit of excellence,we also establish an

efficient logistics and reaction system.We ensure that all the questions could be answered in the shortest time

with satisfaction,all the products be delivery in stipulated frame of time.In general,we are not only producing

our products,but also provide the full after-sale service and complete solution.

The #denso injector replacement# is connected to the injector by the lower holder. Some of the injector is connected to the

combustion chamber from the engine block as we mentioned earlier. The fuel from the fuel pump through the

injector passes through the injector and reaches the injector nozzle. With the movement of the bosch diesel injectors for sale of the

injector nozzle, the fuel is compressed between the nozzle of the injector nozzle and the shaft, creating a

pressure. With the help of the milin push, the micro holes in the end of the #Denso CR Injector Parts# are injected angularly

into the fuel combustion chambers according to the structure of the injector nozzle. The excess non-atomized

fuel is transferred from the nozzle through the nozzle to the return zone.